Fuji Electric, Tokyo Eletech, Teral Products

Molded case circuit breaker / earth leakage circuit breakers

General-purpose molded: G-TWIN standard series line protection

General-purpose molded: G-TWIN global series line protection

General-purpose molded: BX series

General-purpose molded: BW0 series

G-TWIN series ,Motor-protection

G-TWIN series for DC applications

Solid-state type breaker: S series

Miniature circuit breakers: BC series

Miniature circuit breakers: BE1 series

Earth leakage protective relays

Earth leakage protective relays:BRR,EL,RRD series

A relay performs contact output when detecting earth leakage. Both ZCT integrated model and ZCT separated model are available.

Control voltage: Up to 415V AC

Low Voltage Air Circuit Breakers

Low Voltage Air Circuit Breakers: DW series

Full-featured & compact ACB. Ideal for protecting and measuring the power receiving and distribution circuit.

Circuit protectors

Circuit protectors: F series

FUJI's compact and high-performance CP-F series circuit protectors incorporate FUJI's advanced technology.

Their thin sizes make them ideal for use as AC/DC line switches in office andindustrial equipment.

250V AC/65V DC (1-pole) 0.1A to 30A

250V AC/125V DC (2-pole) 0.1A to 30A

250V AC (3-pole) 0.1A to 30A

Low-voltage fuses

Semiconductor protection series, Plug-in type(BLC)

Based on a plug typed current limiting fuse, this model reduces the total clearing I2t, as a high-speed current limiting fuse for the purpose of semiconductor protection.

Rated current：12-140A

Semiconductor protection series, CR2L(S),CR6L type

AC250・600V, breaking capacity of 100kA, partially comply with UL・CSA・TÜV. Max. interrupting value of I2t is small.

Rated current：10-600A

Semiconductor protection series CS5F,CS8F type

AC500・800V, 200kA of breaking capacity The total clearing l 2 t is small.

Rated current：40-1500A

Magnetic contactors, Magnetic starters

Standard type magnetic contactor, magnetic starter: SC and SW series

The SC series is a range of long service-life and high-performance contactors. SC-03 to SC-N3 smallframe contactors provide snap-on fitting of numerous optional units, such as auxiliary contact blocks, coil surge suppressors, and operation counters.

Field modifications are quick and easy to make.

Type SC-N6 and above come with an IC-controlled SUPER MAGNET coil, which operates from both AC and DC sources, to eliminate burnt coils and contact chattering by voltage fluctuation.

Standard type non-reversing contactors and starters Up to 315kW 440 Volts 3-phase (440kW for contactor only)

Industrial Relays SH series

Bifurcated contacts with excellent electrical conductivity/SH-4, SH-5

Rated thermal current: 10A

Standard type magnetic contactor: SC-E series

SC-E series take the line-up to the next step in utility with a new finger protection terminal and box lug terminal construction.

4 to 75kW, 400V AC

Solid-state contactors (SSC)

Solid-state contactors: SS series /3-pole

Long service life with high reliability. Three-phase load ON/OFF controll with the rate of 3-120 Amps.

Rated thermal current: 3-120A

Solid-state contactors: SS series /Single-pole

Long service life with high reliability. Single-phase load ON/OFF controll with the rate of 10-200 Amps.

Rated thermal current　10-200A

Manual motor starters(MMS)

Manual motor starters (MMS) : DUO series

The ability to configure combination starters for compact, reliable motor protection by combining a manual motor starter and a magnetic contactor.

Rated current 0.1 to 63A

Pushbuttons, Pilot lights

Pushbuttons, Pilot lights: AH164, 165, 165-2 series

Pushbuttons, Pilot lights: AR/DR16 minico series

Pushbuttons, Pilot lights for printed board: AH16P, AH16P-2 and AH22P Series

Pushbuttons, Pilot lights: AR22/DR22 series

Pushbuttons, Pilot lights: AM/DM22 series

Pushbuttons, Pilot lights: AR30/DR30 series

Rotary Switches: AC09, AC16, AC32 series

Display lights: DP24, 36, 40, 48 series

Industrial control relays

Card relay:RB series

Compact design with low height and narrow width. 120mW highly sensitive model is available.

Relay and terminal module:RS series

Compact relay consists of card relay and terminal module

Miniature control relays:HH52,53,54 series

General purpose miniature control relay with 3,5 and 7A contact rating

Miniature power relays:HH62,63,64 series

Compact and light weight with 10A of high contact rating.

General purpose relays:HH22,23,24 series

Various product lines, for example MBB contact type. Because of the attached operating status indicator, it is easy to check relays' operation.

Annunciator relay:RV series

RV series provides general-purpose annunciator relays capable of forming even complex system for the signs of defect indication at a low cost.

Flicker relays:JH series

JH series provides flicker-operation-type relays for AC/DC common use.

Time delay relays

Super timers:MS4S,ST7P series

MS4S

DIN48 sized analogue timer

Adopting sexagesimal conversion-free, direct-reading time-scale

The MS4S is a timer with four operation modes.

The on-delay, flicker, one-shot or signal off-delay operation modes can be selected.

ST7P

The ST7P is a highly efficient miniaturized on-delay timer.

The maximum timing interval is 12 hours

Instantaneous stop restart relay:MB4 series

Reduce workloads of the power supply in an industrial unit by having automatic restart as a staggered starting method in sequence during the time of instantaneous voltage interruption.

Sensors, Switches

Strategy Development

Need a solid foundation for your business growth plans? Aria will help you manage sales and meet your current needs

By offering the best professional services and quality products in the market. Don't hesitate and get in touch with us.

Disconnecting switches: V series,RF series

Reliable disconnecting switches that have been chosen by customers for a long time. Small, light, and easy-to-operate. It is easy to mount them on cubicles.

FUJI high voltage disconnecting switches comprise the V and RF types.

The small size and lightness of the V type disconnecting switches make them highly suitable for cubicle use.

They make use of FUJI's specially designed coil spring, a line-contact and ball contact (RF type) system which gives them a high efficient operation without overheating.

V type disconnecting switches are not provided with latches but their design will not permit them to be opened by magnetic force. Switches provided with latches can also be supplied upon request.

Current limiting power fuses: E,SCF,JC series

The fuse can be used independently or incorporated with switches that are not provided with a tripping device, from back-up fuses to current limiting fuses which can interrupt all current ranges.

FUJI current limiting power fuses are available in general purpose and back-up versions. Type SCF and HF ··· E general purpose fuses will interrupt all excessive current ranging from the minimum melting current to the rated interrupting current.

They will accurately interrupt a 200 – 300% overcurrent of the rated current. The fuse can be used independently or incorporated with air load break switches not provided with trip mechanisms. Very economical to install.

The back-up fuses are rated at 12kV or higher and used with switches provided with trip mechanisms incorporated with CT or OCR.

Air load break switches: LBS,LB,RF series

LBS series: Striker mechanism is employed in which the striker opens the switches automatically when the fuse blows.

LB series: Wide variation is available by combining each unit’s functions and the combination is easy to rearrange.

FUJI air load break switch type LBS is provided with current limiting power fuses and type LB is not so fitted. Both types are compact and incorporate arc-extinguishing devices of FUJI's own design.

The arc is drawn into a long narrow chamber with close clearances in which the gases are rapidly cooled and dispersed.

Contact points therefore wear very slowly, so giving switches a long service life.

FUJI air load break switches are recommended for use with power capacitors and transformers.

Circuit breakers

Vacuum circuit breakers: Auto. V series

A compactly assembled circuit breaker, built-in current transformer (CT) and solid-state overcurrent relay (OCR) are provided with standard-type MULTI.VCB.

Breaking currents: 8kA, 12.5kA, Rated voltage: 3.6/7.2kV

Vacuum circuit breakers: New-Auto. V series

A circuit breaker consists of a standard-type MULTI.VCB provided with a current transformer (CT), incorporating a digital multifunctional relay to prevent overcurrent and other effects, and this means it can save energy and reduce person-hours.

Breaking currents: 8kA, 12.5kA, Rated voltage: 3.6/7.2kV

Vacuum circuit breakers: Multi VCB series

A standard-type VCB. A draw-out type is applicable for a board with a width of 500 mm and depth of 700 mm.

Breaking currents: 8kA, 12.5kA, Rated voltage: 3.6/7.2kV

Vacuum Circuit Breakers: HS series

Vacuum circuit breakers are compact circuit breakers designed for safe operation, high reliability and easy maintenance, and are widely used for various types of high voltage circuits.

FUJI V-circuit breakers (VCB) have been developed through the use of our many years of successful experience and advanced technology.

They are compact and light-weight, and are available in a number of current ratings.

Rated current: 3.6/7.2kV～36kV、400～4000A

Vacuum magnetic contactors: HN series

Answers various clients' needs such as installation method, operating voltage, or other. AC/DC compatible, equipped with IC tip in the operating circuit to ensure further reliability in operation.

HN-type vacuum magnetic contactors incorporate a SUPER MAGNET that has a built-in IC. The IC minimizes the power consumption used in the closing circuit. HN types vacuum magnetic contactors operate on both AC and DC power supplies.

A common insulating frame for units with a rated voltage of 3kV and 6kV simplifies switchgear design.

Power monitoring units

Integrated power monitoring units: F-MPC04 series

Multifunctional digital meter integrates necessary functions for power distribution, circuit information management, and electric power monitoring. Capable of measuring 2 distribution systems, meanwhile set the number of feeds per each system for choice.

Mult-circuit power monitoring units: F-MPC04P series

Digital multifunctional meter combines all the necessary measuring functions for power monitoring. Capable of multi-circuit measurement by itself.

Single-circuit power monitoring units: F-MPC04S series

Digital multi-function meter integrating necessary measuring functions for energy monitoring. Model with a function measuring leakage current is also available.

F-MPC04 series power monitoring equipment, designed for used in low voltage circuits, can perform electric power management and monitoring from high to low voltage circuit efficiently and economically, used together with F-MPC60B and F-MPC30 series.

Single-circuit power monitoring units: F-MPC04E series

Internal panel mountable devices for single-circuit power monitoring unit F-MPC series. RS-485 interface is default.

Power monitoring unit: F-MPC Web series

We provide energy-saving solutions that are easy to connect to and collect and that are visible for everyone, anywhere.

Energy Monitoring System: F-MPC I/O series

Input unit for taking in pulse imputs for an integrating Wh meter, gas, and water, or digital inputs of the condition or alart, and etc.

Power monitoring equipment

Multiple function protectors and controllers: F-MPC30,60B series

Multifunctional digital relay combines the functions such as protection, operation, measurement, and monitoring for high voltage power distribution and switching facilities, into one compact unit.

FRENIC-VG

With FRENIC-VG, Fuji Electric has concentrated its technologies to deliver the best-performing inverter on the market.

In addition to its basic performance, this model features the following great improvements: support for previously difficult applications due to technical and capability limitations, easier and more user-friendly maintenance, as well as environmental friendliness and safety.

The FRENIC-VG Series now proudly introduces the inverter as a unit type as well as a stack type.

FRENIC-MEGA

FRENIC-MEGA, which is the successor of former G11S series and named as a “Maximum Engineering for Global Advantage”, is a high performance, multifunctional inverter Fuji Electric has developed by gathering the best of its technologies.

With the flexibility and functionality to support a wide range of applications on all types of mechanical equipment, FRENIC-MEGA takes core capability, responsiveness, environmental awareness, and easy maintenance to the next level.

FRENIC-Ace

The FRENIC-Ace is the inverter that produces excellent cost-performance, maintaining high performance through optimal design. In this way, it can be applied to various machines and devices.

The standard inverter for the next generation, the FRENIC-Ace can be used in almost any type of application - from fans and pumps to specialized machinery.

FRENIC-Mini

With its rich functionality, compact design, simple operation, and global compatibilty, the new FRENIC-Mini C2 elevates the performance of a wide range of devices and equipment - including conveyors, fans, pumps, centrifugal separators, and food processing machines - to give you the system integration, energy efficiency, reduced labor, and lower overall costs you're looking for.

FRENIC-HVAC

FRENIC-HVAC is the first slim type inverter dedicated for a variety of HVAC applications from Fuji Electric. This new series follows European trends and is keeping high Japanese reliability.

Specific functions to manage fan and compressor applications and new energy saving functions are installed as standard, positioning FRENIC-HVAC as a high performance inverter on the HVAC and compressor market.

FRENIC-AQUA

FRENIC-AQUA is the first slim type inverter dedicated for a variety of applications of water supply and wastewater treatment system from Fuji Electric. This new series follows European trends keeping high Japanese reliability.

Specific functions to prevent damage on the systems and new energy saving functions are installed as standard, positioning FRENIC-AQUA as a high performance inverter on the pumping application market.

FRENIC-Lift

Over the years, Fuji Electric has collected a well established know-how of inverters for lift applications. With this focus in mind, we developed a new inverter, specialized in lift applications with all related requirements:

FRENIC-Lift. With FRENIC-Lift, Fuji Electric is well established in the lift industry, and is ready and well-prepared for the European market.

Like all Fuji Electric inverters, FRENIC-Lift offers a big variety and many possibilities - and of course Japanese high quality.

ALPHA7

Fuji's proprietary control algorithm achieves a speed and frequency response at 3.2kHz, the highest level in the industry. This reduces the tact time, enabling high-speed control.

The maximum instantaneous torque of the servo motor is now as high as 350%. This is applicable only to certain models.

The encoder resolution is now as high as 24 bits. This provides much higher control precision than before, enabling high-precision control.

Standard equipment includes the STO function defined in the international standard IEC61800-5-2. In addition, the WSU-ST1 option adds support for SS1, SLS, SBC, and SSM. These safety functions can be easily configured with parameters.

ALPHA5

PTP positioning Positioning function is embedded as standard in general purpose interface unit "ALPHA5 VV". As the ALPHA5 VV type is the standard model, external positioning unit or dedicated items for positioning are not required.

ALPHA5 Smart

High Performance: High-speed and high-precision positioning. Frequency response:1500Hz. Maximum motor speed 6000r/min. High resolution encoder 18-bit ABS:262,144 pulses, 20-bit INC:1,048,576 pulses

High Value: Higher cost performance while maintaining high performance.

High Usability: Improved user-friendliness with new servo operator.

QFP Sockets

IC Sockets for Emulator and QFP. NQPACK can be assembled on the same foot pattern of QFP. Suitable for 32pin (7.0mm x 7.0mm) to 272pin (36.0mm x 36.0mm) QFP ICs.

- NQPACK: Attached to the target board as a socket to mount a QFP IC, or as a connector an emulator.

- HQPACK: Top Cover for IC Package. Used when placing QFP packages onto NQPACK.

- YQPACK: Used to connect the emulator to NQPACK to retrieve signals from NQPACK.

- YQSOCKET: Used to adjust the height between the target board and emulator cable or board.

SOP/SSOP Sockets

SSOP can be loaded in between NSPACK and HSPACK.

Emulator board can be connected to YSPACK and NSPACK assembled on a target board.

Emulator cable or PWB can be connected to YSPACK / YSSOCKET.

NSPACK can be assembled on the same foot pattern of SSOP.

Therse products are in conmliance with RoHS which are very safe for environment.

- NSPACK

- HSPACK

- YSPACK

- YSSOCKET

BGA Sockets

BGA can be loaded in BGA Socket Series. Emulator boards or extension cables can be connected to BGA SOCKET Series 　assembled on target boards.

BGA Socket Series are surface mount products developed for BGA and LGA.

The custom products of lead free solder,multi pins or fine pitch etc can be developed up on request

- CSPACK

- DSPACK

- LSPACK

- BSSOCKET

Emulator Connectors

The series are using widely as emulator connector. The foot patterns of each series are the same size as QFP, so emulator connectors can be soldered on the same foot pattern of QFP. The conatacts are highly reliable. Easy insertion and withdrawal is realized by means of guide pins.

- TQPACK

- TQSOCKET

Conversion Adapters for JTAG

"SICA" Small Interface cable Adapter for JTAG

Connector Types

- 2.54mm pitch connector FPC Type

- 2.54mm pitch connector PWB Type

- 2.54mm ＆1.27mm pitch connector Spiral type

- Mictor 38pin connector Type

Emulator Cable

It is an extension Cable of New type that uses the KC Cable that is general-purpose flexible Cable.

The probing adapter is appended by the standard for analyzing signals.

It is possible to design for EMI by the custom product.

These products are in compliance with RoHS wihich are very safe for environment.

Board-to-Board Cables

Micro strip signal lines(Signal lines on both layers are running on the ground lines on opposite layers)guarantee good data transmission.

100mm and 200mm are available.Choose either length depends on clock speed.

50pin type(number of effective signals is 48 signals)and 80pin type(number of effective is 78 signals)are available.

These products are in compliance with RoHS which are very safe for environment.

Probing Boards

EXA Series

IC mounting evaluation can be do when TQPACK for the emulator connection is used.

It is possible to use it for both TQPACK and NQPACK.(A part of number of pins is excluded).

The signal analyzing is possible to use it for both TQPACK and NQPACK.(except some pin numbers)

These products are in compliance with RoHS which are very safe for environment.

Accessories for semiconductor makers

ARM

Conversion Adapter for JTAG

Probing boards

Computex

RCN connection method Target connector for ROMiCEmini

Cypress Perform

FM3 Series

FM3 Series Socket Types

FM4Series Socket Types

FM0+Series Socket Type

Panasonic

IC Sockets

Applied Board-to-board

Renesas

On-chip debug emulator for the adapters

Toshiba

Designated products for Toshiba

Products in compliance with Toshiba

Other products

Above-ground Pumps

Multistage Pumps

Single-stage Pumps

Self-priming Pumps

Oil Pumps

Submersible Pumps

Drainage & Sewage

Dewatering & Trash Pumps

Freshwater (Borehole)

Semi-vortex

Submersible Solid Conveyor Pumps

Water supply Unit

Fire Fighting Pumps

Household Pumps

Coolant Pumps

Immersion Pumps

Self-priming Pumps

Centrifugal Fans

Mixed Flow Fans

Axial Fans

Fire Fighting Fans

Pressure Fans

Roof Exhaust Fans

Air Handling Units

Jet Fans

Ring Blowers

Coolant Filtration Systems

The coolant filtration system removes chips/dust included in the coolant, circulating in the processing machinery of such as cutting,grinding and drilling.